Enhanced V-Model

Mustafa Seckin Durmus, ilker Ustoglu, Roman Yu. Tsarev, Josef Börcsök

Abstract


Typically, software development processes are time consuming, expensive, and rigorous, particularly for safety-critical applications. Even if guidelines and recommendations are defined by sector-specific functional safety standards, development process may not be completed because of excessive costs or insufficient planning. The V-model is one of the most well-known software development lifecycle model. In this study, the V-model lifecycle is modified by adding an intermediate step. The proposed modification is realized by checking the fault diagnosability of each module. The proposed modification provides three advantages: (1) it checks whether the constructed model covers all software requirements related with faults; (2) it decreases costs by early detection of modeling deficiencies before the coding and testing phases; and (3) it enables code simplicity in decision of fault occurrence.

Full Text:

PDF

References


IEC61508 (2010). Functional safety of electrical/electronic/programmable electronic safety-related systems, Parts 1–7. International Electrotechnical Commission.

Rook P (1986). Controlling Software Projects. Software Engineering Journal, 1, pp. 7-16.

IEC 61508-4 (2010). Functional safety of electrical/electronic/programmable electronic safety-related systems, Part 4: Definitions and Abbreviations. International Electrotechnical Commission.

Munassar NM, Govardhan A (2010). A Comparison Between Five Models of Software Engineering. International Journal of Computer Science Issues, 7, pp. 94-101.

Krishna ST, Sreekanth S, Perumal K, Kumar Reddy KR (2012). Explore 10 Different Types of Software Development Process Models. International Journal of Computer Science and Information Technologies, 3:4580-4584.

Royce WW (1970). Managing the Development of Large Software Systems: Concepts ad Techniques. Proceedings Wescon, pp. 1-9.

Boehm BW (1988). A Spiral Model of Software Development and Enhancement. Computer, 21, pp. 61-72.

Lehman MM (1980). Programs, Life Cycles, and Laws of Software Evolution. Proceedings of the IEEE, 68, pp. 1060-1076.

Rahman RA, Pulm U, Stetter R (2007). Systematic Mechatronic Design of a Piezo-Electric Brake. 16th International Conference on Engineering Design, 28-31 July, Paris, France, pp. 1-12.

Märtin L, Schatalov M, Hagner M, Goltz U, Maibaum O (2013). A Methodology for Model-Based Development and Automated Verification of Software for Aerospace Systems. IEEE Aerospace Conference, 2-9 March, Big Sky, MT, USA, pp. 1-19.

Scippacercola F, Pietrantuono R, Russo R, Zentai A (2015). Model-Driven Engineering of a Railway Interlocking System. 3rd Int Conf on Model-Driven Eng and Soft Development, 2-9 September, Angers, France, pp pp. 509-519.

SSG-39 (2016). Design of Instrumentation and Control Systems for Nuclear Power Plants. IAEA Safety Standards Series.

Kwiatkowska M, Norman G, Parker D (2002). PRISM: Probabilistic Symbolic Model Checker. Field T, Harrison PG, Bradley J, Harder U (ed) Computer Performance Evaluation: Modeling Techniques and Tools, Lecture Notes in Computer Science, Springer, Berlin, Heidelberg, pp. 200-204.

Holzmann GJ (2003). Spin model checker, the: primer and reference manual. Addison-Wesley.

BS EN 50128 (2011). Railway Applications-Communication, Signalling and processing systems: Software for railway control and protection systems. International Electrotechnical Commission.

IEC 61508-3 (2010). Functional safety of electrical/electronic/programmable electronic safety-related systems, Part 3: Software Requirements. International Electrotechnical Commission.

Ratcliffe A (2011). SAS Software Development with the V-Model. 3SAS Global Forum, Coder's Corner, 4-7 April, Las Vegas, Nevada, USA, pp. 1-9.

Brat GP (2017). Reducing V&V Cost of Flight Critical Systems: Myth or Reality? AIAA Information Systems, AIAA SciTech Forum, American Institute of Aeronautics and Astronautics, 9-13 January, Grapevine, Texas, USA, pp. 1-10.

Boehm BW (1984). Verifying and Validating Software Requirements and Design Specifications. IEEE Software, 1, pp. 75-88.

Boehm BW (1984). Software Engineering Economics. IEEE Transactions on Software Engineering, SE-10, pp. 4-21.

Boehm BW (1987). Industrial Software Metrics: A Top Ten List. IEEE Software, 4, pp. 264-271.

Haskins B, Stecklein J, Dick B, Moroney G, Lovell R, Dabney J (2004). Error Cost Escalation Through the Project Life Cycle. 14th Annual Int Symp, Int Council on Systems Engineering, 19-24 June, Toulouse, France, pp. 1723-1737.

Schneider GM, Martin J, Tsai WT (1992). An Experimental Study of Fault Detection in User Requirements Documents. IACM Transactions on Software Engineering and Methodology, 1, pp. 188-204.

Cassandras CG, Lafortune S (2008). Introduction to Discrete Event Systems. Springer, New York.

Sampath M, Sengupta R, Lafortune S, Sinnamohideen K, Teneketzis D (1995). Diagnosability of discrete-event systems. IEEE Trans on Automatic Control, 40, pp. 1555-1575.

Ushio T, Onishi I, Okuda K (1998). Fault detection based on Petri net models with faulty behaviours. International Conference on Systems, Man, and Cybernetics, 11-14 October, San Diego, CA, USA, pp. 113-118.

Sampath M, Sengupta R, Lafortune S, Sinnamohideen K, Teneketzis D (1996). Failure diagnosis using discrete-event models. IEEE Transactions on Control Systems Technology, 4, pp. 105-124.

Murata T (1989). Petri nets: Properties, analysis and applications. Proceedings of the IEEE, 77, pp. 541-580.

Li ZW, Zhou MC, Wu NQ (2008). A survey and comparison of Petri net-based deadlock prevention policies for flexible manufacturing systems. IEEE Trans on Systems, Man, and Cybernetics, Part C: Applications and Reviews, 38, pp. 173–188.

Chung SL (2005). Diagnosing PN-based models with partial observable transitions. International Journal of Computer Integrated Manufacturing, 18, pp. 158-169.

Durmuş MS, Takai S, Söylemez MT (2014). Fault Diagnosis in Fixed-Block Railway Signaling Systems: A Discrete Event Systems Approach. IEEJ Transactions on Electrical and Electronic Engineering, 9, pp. 523-531.




DOI: https://doi.org/10.31449/inf.v42i4.2027

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.