A Web Server to Store the Modeled Behavior Data and Zone Information of the Multidisciplinary Product Model in the CAD Systems

Yatish Bathla, Sandor Szenasi

Abstract


This work focuses on the Human Computer Interaction (HCI) for the multidisciplinary product modeling. Requirement Functional Logical Physical (RFLP) structure has emerged as one of the prominent approaches for modeling the multidisciplinary products. To simplify HCI of a RFLP structured product model, Information Content (IC)provides effective communication and interaction. Though it controls the RFLP level by the Multilevel Abstraction based Self-Adaptive Denition (MAAD) structure. However, it needs a application to represent the modeled behavior data and zone information of an multidisciplinary product model. Further, IC application require a interface to interact with the Computer-Aided Design (CAD) based an multidisciplinary product model application and exchange the information between the database of the servers. As per the knowledge of authors, no work has been done yet on the HCI of the IC. Therefore, this paper propose a Content Web server, where IC application is used to store the modeled behavior data and zone information of the multidisciplinary product model. Then, Content database is created to store the Layer Info-Chunk (LiC) entities information of the multidisciplinary product model. Finally, communication between the Content server and CAD server is done to represent the IC application interface in the multidisciplinary product application. The Apache Tomcat server, PostgreSQL database and RESTful web service are used to implement the operations.


Full Text:

PDF

References


Z. Liang, Z. Jian, Z. Li-Nan and L. Nan. The Application of Human-Computer Interaction Idea in Computer Aided Industrial Design. International Conference on Computer Network, Electronic and Automation (ICCNEA), 160-164, 2017.https://doi.org/10.1109/iccnea.2017.71

Li, Yujiang, Mikael Hedlind, and Torsten Kjellberg. Usability evaluation of CAD CAM: State of the art. Procedia CIRP, 36, 205-210, 2015. https://doi.org/10.1016/j.procir.2015.01.053

Bloom, R. Getting started with CAD/- CAM. Materials & Design, 17(4): 223–224, 1996.https://doi.org/10.1016/S0261-3069(97)88930- 3.

L. Horváth and I. J. Rudas. Systems engineering methods for multidisciplinary product definition. IEEE 12th International Symposium on Intelligent Systems and Informatics (SISY), 293-298, 2014. https://doi.org/10.1109/sisy.2014.6923604

Barfield, W. The law of virtual reality and increasingly smart virtual avatars. Research Handbook on the Law of Virtual and Augmented Reality, 2–4, 2018. https://doi.org/10.4337/9781786438591.00008

Dempsey, M. Dymola for Multi-Engineering Modelling and Simulation. IEEE Vehicle Power and Propulsion Conference, 1-6, 2006. https://doi.org/10.1109/vppc.2006.364294

Peter Fritzson. Principles of Object-Oriented Modeling and Simulation with Modelica 3.3: A Cyber-Physical Approach, Wiley- IEEE Press, John Wiley & Sons Inc, 2015. https://doi.org/10.1002/9781118989166

Baesens, B., Backiel, A., & Broucke, S.vanden (Eds.). Beginning Java Programming, Wrox, 2012. https://doi.org/10.1002/9781119209416

L. Horváth and I. J. Rudas. Towards the Information Content-driven Product Model. Proceedings of the IEEE International Conference on System of Systems Engineering, 1-6, 2008. https://doi.org/10.1109/sysose.2008.4724183

Laszlo Horvath, Imre J. Rudas. Bringing up product model to thinking of engineer. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics, 1355 - 1360, 2008. https://doi.org/10.1109/icsmc.2008.4811474

L. Horváth and I. J. Rudas. Elevated level design intent and behavior driven feature definition for product modeling. 39th Annual Conference of the IEEE Industrial Electronics Society, 1(2), 4374-4379, 2013. https://doi.org/10.1109/iecon.2013.6699839

Seo, Daeil, Yongjae Lee and Byounghyun Yoo. Webizing Interactive CAD Review System Using Super Multiview Autostereoscopic Displays. HCII Posters, Part II, CCIS 714, 62–67, 2017. https://doi.org/10.1007/978-3-319-58753-0-10

Okuya, Yujiro, Nicolas Ladeveze, Olivier Gladin, Cédric Fleury and Patrick Bourdot. Distributed Architecture for Remote Collaborative Modification of Parametric CAD Data. IEEE Fourth VR International Workshop on Collaborative Virtual Environments (3DCVE), 1-4, 2018. https://doi.org/10.1109/3dcve.2018.8637112

Yatish Bathla. Different types of process involved in the information content product model. Proceedings of the IEEE 14th International Symposium on Intelligent Systems and Informatics (SISY), 99-104, 2016. https://doi.org/10.1109/sisy.2016.7601478

Yatish Bathla. Structured organization of Engineering Objects in the information content of PLM system. Proceedings of the IEEE 11th International Symposium on Applied Computational Intelligence and Informatics (SACI), 473 - 478, 2016. https://doi.org/10.1109/saci.2016.7507424

Fielding, R.T., Kaiser, G. The Apache HTTP Server Project, IEEE Internet Computing, 1(4): 88 - 90, 1997. https://doi.org/10.1109/4236.612229.

Neil Matthew, Richard Stones. Introduction to PostgreSQL. Apress, 2005, https://doi.org/10.1007/978- 1-4302-0018-5.

Li Li and Wu Chou. Design Patterns for RESTful Communication Web Services. IEEE International Conference on Web Services, 2010. https://doi.org/10.1109/icws.2010.101

Smolek, P., Heinzl, B., Ecker, H., & Breitenecker, F.. Exploring the Possibilities of Co- Simulation with CATIA V6 Dynamic Behavior Modeling, SNE Simulation Notes Europe, 23(3-4), 2013. https://doi.org/10.11128/sne.23.sn.10205

Sha Liu. Sustainable Building Design Optimization Using Building Information Modeling. ICCREM, 2015. https://doi.org/10.1061/9780784479377.038

Chen, H., Lowe, A.A., de Almeida, F.R., Wong, M., Fleetham, J.A., Wang, B.. Threedimensional computer-assisted study model analysis of long-term oral-appliance wear. Part 1: Methodology. American Journal of Orthodontists & Dentofac. Orthop, 134(3): 393–407, 2008. https://doi.org/10.1016/j.ajodo.2006.10.030

Tim Vernon. Zbrush. Journal of Visual Communication in Medicine, 34(1): 31–35, 2011. https://doi.org/10.3109/17453054.2011.548735

Lennart Jörelid. J2EE FrontEnd Technologies: A Programmer’s Guide to Servlets, JavaServer Pages, and Enterprise JavaBeans. Springer, 2002. https://doi.org/10.1007/978-1-4302-1148-8

Jing Chen, Jiawei Li, Mo Li. Progressive Visualization of Complex 3D Models Over the Internet. Transactions in GIS, 20(6): 887–902, 2016. https://doi.org/10.1111/tgis.12185

Adam Suydam, Jason Pyles. Lockheed Martin Conceptual Design Modeling in the Dassault Systemes 3DEXPERIENCE Platform, AIAA Scitech Forum, 2020. https://doi.org/10.2514/6.2020-1391

Ling-Long Lin, Yun-Tao Song, Yu-Xiang Tang, Qing-Qing Du, Yi-Peng Gong. Implementation and application study on 3D collaborative design for CFETR based on ENOVIA VPM. Fusion Engineering and Design, 100, 198–203, 2015. https://doi.org/10.1016/j.fusengdes.2015.05.072

Buffington, J.. Microsoft SQL Server. Data Protection for Virtual Data Centers. 2011, https://doi.org/10.1002/9781118255766.ch8

Yatish Bathla. Conceptual Models of Information Content for Product Modeling. Acta Polytechnica Hungarica, XV (2): 169-188, 2018. https://doi.org/10.12700/aph.15.1.2018.2.9

H. F. Krikorian. Introduction to objectoriented systems engineering.1. Journal of IT Professional. V(2), 38-42, 2003. https://doi.org/10.1109/MITP.2003.1191791

L. Horváth. New method for enhanced driving of entity generation in RFLP structured product model. 12th IEEE Conference on Industrial Electronics and Applications (ICIEA), 541-546, 2017. https://doi.org/10.1109/iciea.2017.8282903

L. Horváth and I. J. Rudas. Multilevel Abstraction Based Self Control Method for Industrial PLM Model. IEEE International Conference on Industrial Technology, 695-700, 2014. https://doi.org/10.1109/icit.2014.6894915

Laszlo Horvath. New methods on the way to intelligent modeling in computer integrated engineering. Proceedings of the 36th Annual Conference on IEEE Industrial Electronics Society(IECON), 1359-1364, 2010. https://doi.org/10.1109/iecon.2010.5675486

Fielding, R.T., Kaiser, G.. The Apache HTTP Server Project. IEEE Internet Computing, 1(4): 88-90, 1997. https://doi.org/10.1109/4236.612229.

Aleksa Vukotic, James Goodwill. Apache Tomcat 7, Springer Nature Switzerland, Apress 2011. https://doi.org/10.1007/978-1-4302-3724-2

Randers-Pehrson, G., Boutell PNG (Portable Network Graphics) Specification, Version 1.0. PNG Dev. Gr., 1999. https://doi.org/10.17487/rfc2083

Roberto Riascos, Laurent Levy, Josip Stjepandi´c, Arnulf Fröhlich. Digital Mock-up. Concurrent Engineering in the 21st Century Foundations, Developments and Challenges, 355-388, 2015. https://doi.org/10.1007/978-3-319-13776-6_13

Clarke, K.S.. Extensible markup language (XML), in: Understanding Information Retrieval Systems. Management, Types, and Standards, 2011. https://doi.org/10.1201/b11499-52

Yatish Bathla. Info-Chunk driven RFLP Structure based Product Model for Multidisciplinary Cyber Physical Systems. IEEE 16th International Symposium on Intelligent Systems and Informatics (SISY), pp. 000327-000332, 2018. https://doi.org/10.1109/sisy.2018.8524653

He Youquan, Zhang Wei, Xie Jianfang, Wang Jian, Qiu Hanxing. Integrated Application of PLM Based ENOVIA Platform in Domestic Manufacturing Industry. International Conference on Information Management, Innovation Management and Industrial Engineering, nov, 2011. https://doi.org/10.1109/iciii.2011.202

Richard Earp, Sikha Bagui. Database Design Using Entity-Relationship Diagrams. Foundations of Database Design, june, 2003. https://doi.org/10.1201/9780203486054

Heller, D., Krenzelok, L., Orr, J. Webtop: Realities in designing a web-application platform. IEEE Potentials, Proceedings of the 2003 Conference on Designing for User Experiences. DUX ’03, 2003, https://doi.org/10.1145/997078.997115




DOI: https://doi.org/10.31449/inf.v44i2.2660

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.