Computer-aided architectural design optimization based on BIM Technology

Haiyan Fan, Bhawna Goyal, Kayhan Zrar Ghafoor

Abstract


This article addresses the problem of the non-circulation of information in each stage of architectural design. This paper explores the architectural design process based on the BIM platform and puts forward the structural design method based on the BIM platform. It carries out the seismic analysis of a high-rise building with a transfer floor structure and compares the analysis results with the structural analysis software commonly used by the current design institute. The results obtained for experimentation show that the period ratio, displacement ratio, and the first six modes calculated by the two methods in the modal analysis are consistent. The error between calculation results and PKPM calculation results is within a reasonable range. In the analysis of the mode decomposition response spectrum method, the seismic forces in X and Y directions, floor shear, overturning moment, floor average displacement, and displacement angle obtained by the two models are compared respectively. The analysis results of the two methods accord with the mechanical characteristics of the transfer floor structure, and the calculation error is within the allowable range. The structural design based on the BIM platform has the advantages of high visualization, parameter-driven component size, and high model accuracy, improving design drawing efficiency.


Full Text:

PDF

References


Schlueter, A., & Geyer, P. (2018). Linking BIM and Design of Experiments to balance architectural and technical design factors for energy performance. Automation in Construction, 86, 33-43.

https://doi.org/10.1016/j.autcon.2017.10.021

Veloso, P., Celani, G., & Scheeren, R. (2018). From the generation of layouts to the production of construction documents: An application in the customization of apartment plans. Automation in Construction, 96, 224-235.

https://doi.org/10.1016/j.autcon.2018.09.013

Ohki, C., Okamoto, T., Ohga, H., & Yoshizawa, N. (2018). Energy performance evaluation of outside sun shadings using radiance and newhasp. Journal of Environmental Engineering (Japan), 83(753), 861-870. https://doi.org/10.3130/aije.83.861

Ansah, M. K., Chen, X., Yang, H., Lu, L., & Lam, P. T. (2019). A review and outlook for integrated BIM application in green building assessment. Sustainable Cities and Society, 48, 101576.

https://doi.org/10.1016/j.scs.2019.101576

Ren, X., Li, C., Ma, X., Chen, F., Wang, H., Sharma, A., ... & Masud, M. (2021). Design of multi-information fusion based intelligent electrical fire detection system for green buildings. Sustainability, 13(6), 3405.

https://doi.org/10.3390/su13063405

Yuan, Z., Sun, C., & Wang, Y. (2018). Design for Manufacture and Assembly-oriented parametric design of prefabricated buildings. Automation in Construction, 88, 13-22.

https://doi.org/10.1016/j.autcon.2017.12.021

Kamel, E., & Memari, A. M. (2019). Review of BIM's application in energy simulation: Tools, issues, and solutions. Automation in construction, 97, 164-180.

https://doi.org/10.1016/j.autcon.2018.11.008

El Sayary, S., & Omar, O. (2021). Designing a BIM energy-consumption template to calculate and achieve a net-zero-energy house. Solar Energy, 216, 315-320. https://doi.org/10.1016/j.solener.2021.01.003

Du, J., Zou, Z., Shi, Y., & Zhao, D. (2018). Zero latency: Real-time synchronization of BIM data in virtual reality for collaborative decision-making. Automation in Construction, 85, 51-64.

https://doi.org/10.1016/j.autcon.2017.10.009

Al Hattab, M., & Hamzeh, F. (2018). Simulating the dynamics of social agents and information flows in BIM-based design. Automation in Construction, 92, 1-22.

https://doi.org/10.1016/j.autcon.2018.03.024

Ning, G., Kan, H., Zhifeng, Q., Weihua, G., & Geert, D. (2018). e-BIM: a BIM-centric design and analysis software for Building Integrated Photovoltaics. Automation in Construction, 87, 127-137.

https://doi.org/10.1016/j.autcon.2017.10.020

Heaton, J., Parlikad, A. K., & Schooling, J. (2019). Design and development of BIM models to support operations and maintenance. Computers in industry, 111, 172-186.

https://doi.org/10.1016/j.compind.2019.08.001

Lin, Y. C., Chen, Y. P., Yien, H. W., Huang, C. Y., & Su, Y. C. (2018). Integrated BIM, game engine and VR technologies for healthcare design: A case study in cancer hospital. Advanced Engineering Informatics, 36, 130-145.

https://doi.org/10.1016/j.aei.2018.03.005

Mattern, H., & König, M. (2018). BIM-based modeling and management of design options at early planning phases. Advanced Engineering Informatics, 38, 316-329.

https://doi.org/10.1016/j.aei.2018.08.007

Mesároš, P., Mandičák, T., & Behúnová, A. (2020). Use of BIM technology and impact on productivity in construction project management. Wireless networks, 1-8.

https://doi.org/10.1007/s11276-020-02302-6

Chen, R., & Sharma, A. (2021). Construction of complex environmental art design system based on 3D virtual simulation technology. International Journal of System Assurance Engineering and Management, 1-8.

https://doi.org/10.1007/s13198-021-01104-z

Jia, M., Komeily, A., Wang, Y., & Srinivasan, R. S. (2019). Adopting Internet of Things for the development of smart buildings: A review of enabling technologies and applications. Automation in Construction, 101, 111-126.

https://doi.org/10.1016/j.autcon.2019.01.023

Sun, H., Fan, M., & Sharma, A. (2021). Design and implementation of construction prediction and management platform based on building information modelling and three‐dimensional simulation technology in industry 4.0. IET collaborative intelligent manufacturing, 3(3), 224-232.

https://doi.org/10.1049/ cim2.12019

Wang, P., Sulaimani, H. J., & Kim, S. H. (2021). Digital model creation and image meticulous processing based on variational partial differential equation. Applied Mathematics and Nonlinear Sciences.

https://doi.org/10.2478/amns.2021.1.00047

Sun, Y., & Sharma, A. (2022). Research and Design of High Efficiency Superfine Crusher using CAD Technology. Computer-Aided Design and Applications, 19(S2), 26-38.

https://doi.org/10.14733/cadaps.2022.S2.26-38

Gong, P., & Li, J. (2022). Application of Computer 3D Modeling Technology in Modern Garden Ecological Landscape Simulation Design. Security and Communication Networks, 2022.

https://doi.org/10.1155/2022/7646452

Singh, P. K., & Sharma, A. (2022). An intelligent WSN-UAV-based IoT framework for precision agriculture application. Computers and Electrical Engineering, 100, 107912.

https://doi.org/10.1016/j.compeleceng.2022.107912

Zeng, H., Dhiman, G., Sharma, A., Sharma, A., & Tselykh, A. (2021). An IoT and Blockchain‐based approach for the smart water management system in agriculture. Expert Systems, e12892.

https://doi.org/10.1111/exsy.12892

Sharma, A., & Singh, P. K. (2021). UAV‐based framework for effective data analysis of forest fire detection using 5G networks: An effective approach towards smart cities solutions. International Journal of Communication Systems, e4826.

https://doi.org/10.1002/dac.4826

Sharma, A., Singh, P. K., & Kumar, Y. (2020). An integrated fire detection system using IoT and image processing technique for smart cities. Sustainable Cities and Society, 61, 102332.

https://doi.org/10.1016/j.scs.2020.102332

Hossain, M. A., Abbott, E. L., Chua, D. K., Nguyen, T. Q., & Goh, Y. M. (2018). Design-for-safety knowledge library for BIM-integrated safety risk reviews. Automation in Construction, 94, 290-302.

https://doi.org/10.1016/j.autcon.2018.07.010

Simeone, D., Cursi, S., & Acierno, M. (2019). BIM semantic-enrichment for built heritage representation. Automation in Construction, 97, 122-137.

https://doi.org/10.1016/j.autcon.2018.11.004

Cavalliere, C., Habert, G., Dell'Osso, G. R., & Hollberg, A. (2019). Continuous BIM-based assessment of embodied environmental impacts throughout the design process. Journal of Cleaner Production, 211, 941-952.

https://doi.org/10.1016/j.jclepro.2018.11.247

Röck, M., Hollberg, A., Habert, G., & Passer, A. (2018). LCA and BIM: Integrated assessment and visualization of building elements’ embodied impacts for design guidance in early stages. Procedia CIRP, 69, 218-223.

https://doi.org/10.1016/j.procir.2017.11.087

Hilal, M., Maqsood, T., & Abdekhodaee, A. (2018). A scientometric analysis of BIM studies in facilities management. International Journal of Building Pathology and Adaptation.

https://doi.org/10.1108/IJBPA-04-2018-0035

Schlueter, A., & Geyer, P. (2018). Linking BIM and Design of Experiments to balance architectural and technical design factors for energy performance. Automation in Construction, 86, 33-43.

https://doi.org/10.1016/j.autcon.2017.10.021

Yuan, Z., Sun, C., & Wang, Y. (2018). Design for Manufacture and Assembly-oriented parametric design of prefabricated buildings. Automation in Construction, 88, 13-22.

https://doi.org/10.1016/j.autcon.2017.12.021

Veloso, P., Celani, G., & Scheeren, R. (2018). From the generation of layouts to the production of construction documents: An application in the customization of apartment plans. Automation in Construction, 96, 224-235.

https://doi.org/10.1016/j.autcon.2018.09.013

Madan, J., Mani, M., Lee, J. H., & Lyons, K. W. (2015). Energy performance evaluation and improvement of unit-manufacturing processes: injection molding case study. Journal of Cleaner Production, 105, 157-170.

https://doi.org/10.1016/j.jclepro.2014.09.060

Soust-Verdaguer, B., Llatas, C., & García-Martínez, A. (2017). Critical review of bim-based LCA method to buildings. Energy and Buildings, 136, 110-120.

https://doi.org/10.1016/j.enbuild.2016.12.009

Ahsan, S., Guo, Z., Miao, Z., Sotiriou, I., Koutsoupidou, M., Kallos, E., & Kosmas, P. (2018). Design and experimental validation of a multiple-frequency microwave tomography system employing the DBIM-TwIST algorithm. Sensors, 18(10), 3491.

https://doi.org/10.3390/s18103491




DOI: https://doi.org/10.31449/inf.v46i3.3935

Creative Commons License
This work is licensed under a Creative Commons Attribution 3.0 License.