Chaotic association feature extraction of big data clustering based on Internet of Things
This article addresses the stabilization of chaotic characteristics in abnormal data by proposing the chaotic correlation feature extraction of big data clustering based on the Internet of things. The chaotic features in big data usually show complex folding and distortion without obvious rules and order and non-synchronization. In this paper, the extracted correlation dimension is used as the chaotic feature of big data clustering. The one-dimensional time series can be extended in multi-dimensional space is analyzed based on phase space reconstruction, so as to extract the chaotic correlation dimension features. After the relevant experimental analysis, this paper mainly compares the energy consumption and processing time of the two respective algorithms. In the simulation parameter design, the time interval of big data packet generation is 0.1s, and the data is generated from the simulation time of 300s. The results obtained show that when dealing with the same amount of data, the energy consumption of this algorithm is significantly lower than that of the traditional algorithm. When dealing with the same amount of data, the time required by this algorithm is significantly lower than that of the traditional algorithm. This is because this algorithm is easy to implement and has good clustering efficiency for data, so the clustering time is short. With the gradual increase of the amount of data, the correlation dimension of this algorithm tends to be stable. While the correlation dimension of the traditional algorithm fluctuates greatly, it is revealed that the proposed approach has high data clustering efficiency and verifies the effectiveness of this algorithm.
Bu, F. (2018). An efficient fuzzy c-means approach based on canonical polyadic decomposition for clustering big data in IoT. Future Generation Computer Systems, 88, 675-682.
Bu, F., Hu, C., Zhang, Q., Bai, C., Yang, L. T., & Baker, T. (2020). A Cloud-Edge-aided Incremental High-order Possibilistic c-Means Algorithm for Medical Data Clustering. IEEE Transactions on Fuzzy Systems, 29(1), 148-155.
Liu, Y., Zhang, J., & Zhan, J. (2021). Privacy protection for fog computing and the internet of things data based on blockchain. Cluster Computing, 24(2), 1331-1345.
Lye, G. X., Cheng, W. K., Tan, T. B., Hung, C. W., & Chen, Y. L. (2020). Creating personalized recommendations in a smart community by performing user trajectory analysis through social internet of things deployment. Sensors, 20(7), 2098.
Cai, G., Fang, Y., Chen, P., Han, G., Cai, G., & Song, Y. (2020). Design of an MISO-SWIPT-aided code-index modulated multi-carrier M-DCSK system for e-health IoT. IEEE Journal on Selected Areas in Communications, 39(2), 311-324.
Xia, H., Huang, W., Li, N., Zhou, J., & Zhang, D. (2019). PARSUC: A parallel subsampling-based method for clustering remote sensing big data. Sensors, 19(15), 3438.
Arora, S., Sharma, M., & Anand, P. (2020). A novel chaotic interior search algorithm for global optimization and feature selection. Applied Artificial Intelligence, 34(4), 292-328.
Maddumala, V. R. (2020). Big Data-Driven Feature Extraction and Clustering Based on Statistical Methods. Traitement du Signal, 37(3).
Liu, W., Wang, X., & Peng, W. (2019). Secure remote multi-factor authentication scheme based on chaotic map zero-knowledge proof for crowdsourcing internet of things. IEEE Access, 8, 8754-8767.
Boushaki, S. I., Kamel, N., & Bendjeghaba, O. (2018). A new quantum chaotic cuckoo search algorithm for data clustering. Expert Systems with Applications, 96, 358-372.
Yang, Q., Ruan, J., Zhuang, Z., & Huang, D. (2019). Chaotic analysis and feature extraction of vibration signals from power circuit breakers. IEEE Transactions on Power Delivery, 35(3), 1124-1135.
Park, S. W., & Lee, I. Y. (2019). Enhanced signature RTD transaction scheme based on Chebyshev polynomial for mobile payments service in IoT device environment. The Journal of Supercomputing, 75(8), 4617-4637.
Cui, Y. (2018). Application of the improved chaotic self-adapting monkey algorithm into radar systems of internet of things. IEEE Access, 6, 54270-54281.
Roy, S., Chatterjee, S., Das, A. K., Chattopadhyay, S., Kumari, S., & Jo, M. (2017). Chaotic map-based anonymous user authentication scheme with user biometrics and fuzzy extractor for crowdsourcing Internet of Things. IEEE Internet of Things Journal, 5(4), 2884-2895.
Li, L., Wen, G., Wang, Z., & Yang, Y. (2019). Efficient and secure image communication system based on compressed sensing for IoT monitoring applications. IEEE Transactions on Multimedia, 22(1), 82-95.
Yan, Z., Liu, J., Vasilakos, A. V., & Yang, L. T. (2015). Trustworthy data fusion and mining in Internet of Things. Future Generation Computer Systems, 49(C), 45-46.
Chen, F., Li, Q., Li, M., Huang, F., Zhang, H., Kang, J., & Wang, P. (2021). Unclonable fluorescence behaviors of perovskite quantum dots/chaotic metasurfaces hybrid nanostructures for versatile security primitive. Chemical Engineering Journal, 411, 128350.
Song, T., Li, R., Mei, B., Yu, J., Xing, X., & Cheng, X. (2017). A privacy preserving communication protocol for IoT applications in smart homes. IEEE Internet of Things Journal, 4(6), 1844-1852.
Alarifi, A., Sankar, S., Altameem, T., Jithin, K. C., Amoon, M., & El-Shafai, W. (2020). A novel hybrid cryptosystem for secure streaming of high efficiency H. 265 compressed videos in IoT multimedia applications. IEEE Access, 8, 128548-128573.
Niu, Z., Zheng, M., Zhang, Y., & Wang, T. (2019). A new asymmetrical encryption algorithm based on semitensor compressed sensing in WBANs. IEEE Internet of Things Journal, 7(1), 734-750.
Li, L., Liu, L., Peng, H., Yang, Y., & Cheng, S. (2018). Flexible and secure data transmission system based on semitensor compressive sensing in wireless body area networks. IEEE Internet of Things Journal, 6(2), 3212-3227.
Yung, C., Chen, C. C., Yuan, Y. L., & Li, C. (2019). A Systematic Model of Big Data Analytics for Clustering Browsing Records into Sessions Based on Web Log Data. J. Comput., 14(2), 125-133.
Jang, S. W., & Kim, G. Y. (2017). A monitoring method of semiconductor manufacturing processes using Internet of Things–based big data analysis. International Journal of Distributed Sensor Networks, 13(7), 1550147717721810. https://doi.org/10.1177/1550147717721810
Gong, X., Liu, L., Fong, S., Xu, Q., Wen, T., & Liu, Z. (2019). Comparative research of swarm intelligence clustering algorithms for analyzing medical data. IEEE Access, 7, 137560-137569.
Lee, Y. C., Huang, S. C., Huang, C. H., & Wu, H. H. (2016). A new approach to identify high burnout medical staffs by kernel k-means cluster analysis in a regional teaching hospital in Taiwan. Inquiry: The Journal of Health Care Organization, Provision, and Financing, 53, 0046958016679306. https://doi.org/10.1177/0046958016679306
Shabaz, M., Sharma, A., Al Ajrawi, S., & Estrela, V. V. (2022). Multimedia-based emerging technologies and data analytics for Neuroscience as a Service (NaaS). Neuroscience Informatics, 2(3), 100067.
Poongodi, M., Hamdi, M., Malviya, M., Sharma, A., Dhiman, G., & Vimal, S. (2022). Diagnosis and combating COVID-19 using wearable Oura smart ring with deep learning methods. Personal and ubiquitous computing, 26(1), 25-35.
Kumbinarasaiah, S., & Raghunatha, K. R. (2021). A novel approach on micropolar fluid flow in a porous channel with high mass transfer via wavelet frames. Nonlinear Engineering, 10(1), 39-45.
Wang, H., Sharma, A., & Shabaz, M. (2022). Research on digital media animation control technology based on recurrent neural network using speech technology. International Journal of System Assurance Engineering and Management, 13(1), 564-575.
Ting, L., Khan, M., Sharma, A., & Ansari, M. D. (2022). A secure framework for IoT-based smart climate agriculture system: Toward blockchain and edge computing. Journal of Intelligent Systems, 31(1), 221-236.
Sharma, D., Kaur, R., Sandhir, M., & Sharma, H. (2021). Finite element method for stress and strain analysis of FGM hollow cylinder under effect of temperature profiles and inhomogeneity parameter. Nonlinear Engineering, 10(1), 477-487.
Ren, Y., Rubaiee, S., Ahmed, A., Othman, A. M., & Arora, S. K. (2022). Multi-objective optimization design of steel structure building energy consumption simulation based on genetic algorithm. Nonlinear Engineering, 11(1), 20-28.
Singh, P. K., & Sharma, A. (2022). An intelligent WSN-UAV-based IoT framework for precision agriculture application. Computers and Electrical Engineering, 100, 107912.
Zeng, H., Dhiman, G., Sharma, A., Sharma, A., & Tselykh, A. (2021). An IoT and Blockchain‐based approach for the smart water management system in agriculture. Expert Systems, e12892.
Sharma, A., & Singh, P. K. (2021). UAV‐based framework for effective data analysis of forest fire detection using 5G networks: An effective approach towards smart cities solutions. International Journal of Communication Systems, e4826.
Sharma, A., Singh, P. K., & Kumar, Y. (2020). An integrated fire detection system using IoT and image processing technique for smart cities. Sustainable Cities and Society, 61, 102332.
Gunupudi, R. K., Nimmala, M., Gugulothu, N., & Gali, S. R. (2017). CLAPP: A self constructing feature clustering approach for anomaly detection. Future Generation Computer Systems, 74, 417-429.
Sharma, A. (2021). Integrity and Multimedia Data Management using Emerging Technologies in the Healthcare Applications-Part II. Recent Advances in Electrical & Electronic Engineering (Formerly Recent Patents on Electrical & Electronic Engineering), 14(7), 698-699. https://doi.org/10.2174/235209651407211104091930
Wang, Y., Chen, Q., Kang, C., & Xia, Q. (2016). Clustering of electricity consumption behavior dynamics toward big data applications. IEEE transactions on smart grid, 7(5), 2437-2447.
Guo, Z., & Xiao, Z. (2021). Research on online calibration of lidar and camera for intelligent connected vehicles based on depth-edge matching. Nonlinear Engineering, 10(1), 469-476. https://doi.org/10.1515/nleng-2021-0038
Deng, Z., Hu, Y., Zhu, M., Huang, X., & Du, B. (2015). A scalable and fast OPTICS for clustering trajectory big data. Cluster Computing, 18(2), 549-562.
Chen, Y., Zhang, W., Dong, L., Cengiz, K., & Sharma, A. (2021). Study on vibration and noise influence for optimization of garden mower. Nonlinear Engineering, 10(1), 428-435. https://doi.org/10.1515/nleng-2021-0034
Sharma, A., Singh, P. K., Hong, W. C., Dhiman, G., & Slowik, A. (2021). Introduction to the Special Issue on Artificial Intelligence for Smart Cities and Industries. Scalable Computing: Practice and Experience, 22(2), 89-91.
Luna-Romera, J. M., García-Gutiérrez, J., Martínez-Ballesteros, M., & Riquelme Santos, J. C. (2018). An approach to validity indices for clustering techniques in big data. Progress in Artificial Intelligence, 7(2), 81-94.
This work is licensed under a Creative Commons Attribution 3.0 License.